Gas Hold off button
Part number: K91000M10
The K91000M10 Hold Off Unit provides a robust and convenient point to apply a temporary hold to release of fire protection extinguishant release. The robust pushbutton is shrouded to prevent accidental operation and is coloured to comply with the requirements of BS7273-1.
Housed in an attractive surface mounting single gang enclosure, the unit is suitable for flush mounting to a standard single gang back box.



Please call or Enquire Here for pricing

qty

Sigma XT Surface status unit 10 Lamp + Mode Select and Gas Release ( IP65 External Use)
Part number: W911113W8
The Sigma Si range of status indicators provide detailed status information for Sigma XT/XT+ extinguishant release control equipment.
All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.



Please call or Enquire Here for pricing

qty

Sigma XT Status Unit 6 Lamp + Mode Select and Gas Release
Part number: K911110M8
The Sigma Si range of status indicators provide detailed status information for Sigma XT/XT+ extinguishant release control equipment.
All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.



Please call or Enquire Here for pricing

qty

Hochiki - Conventional Schottky Base
Part number: YBN-R/6SK
Model YBN-R/6SK features an in-line Schottky Diode, providing line continuity during detector removal (Call Points can be wired in any order on the zone providing a suitable panel and End Of Line (EOL) unit is used). The integrated third terminal provides remote indicator output.



Please call or Enquire Here for pricing

qty

Hochiki - Manual Call Point - RED
Part number: HCP-E
Model HCP-E(SCI) is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit incorporates a bi- coloured LED, which can be selected as pulsing/non-pulsing*1 for communications polling and is continuously lit when the HCP-E(SCI) is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.
The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required (sold separately). An optional glass element is also available.



Please call or Enquire Here for pricing

qty

Bell - 24 Volt 6" Motorised
Part number: MBF-6CV-24
The bell remains the most commonly used alarm for fire evacuation systems. Recognising this, Vimpex continue to innovate with their all-aluminium range of fire alarm bells.

Five bells make up the range of 150mm (6 inch) and 200mm (8 inch) internal and external units. Being of aluminium construction, our bells have a very high volume output matched with extremely low power consumption - just 11mA for the 150mm internal.

The specially designed weatherproof bells have an aluminium back box giving either single or double threaded entry for maximum flexibility in installation. This is supplied as a full fixing kit with gasket and screws.




Please call or Enquire Here for pricing

qty

Firesure Fire Cable - 4 Core 1.5mm Fire Alarm Cable
Part number: FS4C1.5R100

Please call or Enquire Here for pricing

qty