Update cookies preferences

You Searched For ""

Price: £0.85
ABS 45 Degree Bend 25mm
Part number: ABSG002-25
Designed for changing the direction of a pipe run at 45 degree’s on an aspirating smoke detection pipe network.
Price: £0.85
ABS 45 Degree Bend 25mm
Part number: ABS002-25
Designed for changing the direction of a pipe run at 45 degree’s on an aspirating smoke detection pipe network.

Price: £0.85
ABS 45 Degree Bend 25mm
Part number: WABS002-25
Designed for changing the direction of a pipe run at 45 degree’s on an aspirating smoke detection pipe network.
Price: £1.85
ABS 90 Degree Bend 25mm
Part number: WABS001-25
Designed for changing the direction of a pipe run at 90 degree’s on an aspirating smoke detection pipe network.
Price: £1.85
ABS 90 Degree Bend 25mm
Part number: ABS001-25
Designed for changing the direction of a pipe run at 90 degree’s on an aspirating smoke detection pipe network.

Price: £1.85
ABS 90 Degree Bend 25mm
Part number: ABSG001-25
Designed for changing the direction of a pipe run at 90 degree’s on an aspirating smoke detection pipe network.
Price: £0.4
ABS Adaptor 25/27mm
Part number: ABSG005-1
Connects two pieces of aspirating smoke detection pipe of different sizes 25mm to 27mm (VisaVersa).
Price: £0.4
ABS Adaptor 25/27mm
Part number: ABS005-1
Connects two pieces of aspirating smoke detection pipe of different sizes 25mm to 27mm (VisaVersa).

Price: £0.4
ABS Adaptor 25/27mm
Part number: ABS005-1
Connects two pieces of aspirating smoke detection pipe of different sizes 25mm to 27mm (VisaVersa).

Price: £0.4
ABS Adaptor 25/27mm
Part number: WABS005-1
Connects two pieces of aspirating smoke detection pipe of different sizes 25mm to 27mm (VisaVersa).
Price: £0.29
ABS Clips 25/27mm
Part number: WABS004
Aspirating smoke detection pipe clip, Designed to support both 25mm and 27mm aspirating detection smoke pipe.
Price: £0.29
ABS Clips 25/27mm
Part number: ABSG004
Aspirating smoke detection pipe clip, Designed to support both 25mm and 27mm aspirating detection smoke pipe.
Price: £7.5
ABS Conical End Cap Kit
Part number: ABSG019C/25EC
The capillary end cap is fixed to one end of the pipe run, followed by 2 meters of capillary 10mm OD nylon tube which links to the conical sampling head which is specifically designed to operate in a chilled or cold store.

Price: £7.5
ABS Conical End Cap Kit
Part number: ABS019C/25EC
The capillary end cap is fixed to one end of the pipe run, followed by 2 meters of capillary 10mm OD nylon tube which links to the conical sampling head which is specifically designed to operate in a chilled or cold store.

Price: £7.5
ABS Conical End Cap Kit
Part number: WABS019C/25EC
The capillary end cap is fixed to one end of the pipe run, followed by 2 meters of capillary 10mm OD nylon tube which links to the conical sampling head which is specifically designed to operate in a chilled or cold store.

Price: £7.5
ABS Conical End Cap Kit 27mm
Part number: ABS019C-27-EC
The capillary end cap is fixed to one end of the pipe run, followed by 2 meters of capillary 10mm OD nylon tube which links to the conical sampling head which is specifically designed to operate in a chilled or cold store.
Price: £3.5
ABS Conical Head Only
Part number: E700-SP
Is fixed to a ceiling tile, chill or frozen store ceiling with the nut or washer (supplied) to sample air. The conical shape is specifically designed to avoid ice or condensation from freezing over or covering the sampling hole.

Price: £3.5
ABS Conical Head Only
Part number: E700-SP
Is fixed to a ceiling tile, chill or frozen store ceiling with the nut or washer (supplied) to sample air. The conical shape is specifically designed to avoid ice or condensation from freezing over or covering the sampling hole.

Price: £3.5
ABS Conical Head Only
Part number: E700-SP
Is fixed to a ceiling tile, chill or frozen store ceiling with the nut or washer (supplied) to sample air. The conical shape is specifically designed to avoid ice or condensation from freezing over or covering the sampling hole.

Price: £3.5
ABS Conical Head Only
Part number: WE700-SP
Is fixed to a ceiling tile, chill or frozen store ceiling with the nut or washer (supplied) to sample air. The conical shape is specifically designed to avoid ice or condensation from freezing over or covering the sampling hole.
Price: £7.5
ABS Conical Sampling Kit
Part number: WABS019C/25
Used when sampling is required in a chill or cold store. The conical head prevents ice or condensation from covering the sampling hole.
Price: £7.5
ABS Conical Sampling Kit
Part number: ABS019C/25
Used when sampling is required in a chill or cold store. The conical head prevents ice or condensation from covering the sampling hole.



Price: £7.5
ABS Conical Sampling Kit
Part number: ABSG019C
Used when sampling is required in a chill or cold store. The conical head prevents ice or condensation from covering the sampling hole.

Price: £7.5
ABS Conical Sampling Kit 27mm
Part number: ABS019C-27
Used when sampling is required in a chill or cold store. The conical head prevents ice or condensation from covering the sampling hole.


Price: £6.5
ABS Discrete End Cap Kit
Part number: ABSG020/25EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links into the discrete head. The discrete cap is supplied with a solid head.

Price: £6.5
ABS Discrete End Cap Kit
Part number: ABS020/25EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links into the discrete head. The discrete cap is supplied with a solid head.

Price: £6.5
ABS Discrete End Cap Kit
Part number: WABS020/25EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links into the discrete head. The discrete cap is supplied with a solid head.
Price: £6.5
ABS Discrete End Cap Kit 27mm
Part number: ABS020-27-EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links into the discrete head. The discrete cap is supplied with a solid head.

Price: £7.5
ABS Discrete Kit
Part number: ABSG020
The capillary Tee piece fits on to the pipe run. Is followed by a 2meter 10mm OD nylon tube which links into the discrete head.

Price: £7.5
ABS Discrete Kit
Part number: WABS020/25
The capillary Tee piece fits on to the pipe run. Is followed by a 2meter 10mm OD nylon tube which links into the discrete head.
Price: £7.5
ABS Discrete Kit
Part number: ABS020/25
The capillary Tee piece fits on to the pipe run. Is followed by a 2meter 10mm OD nylon tube which links into the discrete head.



Price: £7.5
ABS Discrete Kit 27mm
Part number: ABS020-27
The capillary Tee piece fits on to the pipe run. Is followed by a 2meter 10mm OD nylon tube which links into the discrete head.


Price: £0.6
ABS End Cap Adaptor 25/10mm
Part number: ECAG-25/10
The capillary end cap is used when it is necessary to sample air not only in the pipe run, but also at the end of the pipe run.
Price: £0.6
ABS End Cap Adaptor 25/10mm
Part number: ECA 25/10
The capillary end cap is used when it is necessary to sample air not only in the pipe run, but also at the end of the pipe run.

Price: £0.6
ABS End Cap Adaptor 25/10mm
Part number: WECA 25/10
The capillary end cap is used when it is necessary to sample air not only in the pipe run, but also at the end of the pipe run.
Price: £0.6
ABS End Cap Adaptor 27/10mm
Part number: ECA 27/10
The capillary end cap is used when it is necessary to sample air not only in the pipe run, but also at the end of the pipe run.
Price: £0.4
ABS End Caps 25mm
Part number: ABSG007-25
Used to terminate air flow on the air sampling network.
Price: £0.4
ABS End Caps 25mm
Part number: ABS007-25
Used to terminate air flow on the air sampling network.
Price: £0.4
ABS End Caps 25mm
Part number: WABS007-25
Used to terminate air flow on the air sampling network.
Price: £6.5
ABS Flush End Cap Kit
Part number: WABS019F/25EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links in to the flush sampling head, which is fixed by a nylon nut/washer to the ceiling tile.
Price: £6.5
ABS Flush End Cap Kit
Part number: ABS019F/25EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links in to the flush sampling head, which is fixed by a nylon nut/washer to the ceiling tile.

Price: £6.5
ABS Flush End Cap Kit
Part number: ABSG019F/25EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links in to the flush sampling head, which is fixed by a nylon nut/washer to the ceiling tile.

Price: £6.5
ABS Flush End Cap Kit 27mm
Part number: ABS019F-27-EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links in to the flush sampling head, which is fixed by a nylon nut/washer to the ceiling tile.
Price: £3.5
ABS Flush Head Only
Part number: WPIP-015
Used to fix to a ceiling tile with the nut or washer (supplied) to sample air.
Price: £3.5
ABS Flush Head Only
Part number: PIP-015
Used to fix to a ceiling tile with the nut or washer (supplied) to sample air.



Price: £3.5
ABS Flush Head Only
Part number: PIP-015
Used to fix to a ceiling tile with the nut or washer (supplied) to sample air.



Price: £3.5
ABS Flush Head Only
Part number: PIP-015
Used to fix to a ceiling tile with the nut or washer (supplied) to sample air.



Price: £6.5
ABS Flush Sampling Kit
Part number: WABS019F/25
Used when the aspirating pipe work is above a suspended ceiling, the flush head is fixed to the ceiling tile with the supplied nut and linked to the pipework using a two meter length of 10mm OD tubing and a capillary Tpiece which links into the pipe.

Price: £6.5
ABS Flush Sampling Kit
Part number: ABSG019F
Used when the aspirating pipe work is above a suspended ceiling, the flush head is fixed to the ceiling tile with the supplied nut and linked to the pipework using a two meter length of 10mm OD tubing and a capillary T piece which links into the pipe.


Price: £6.5
ABS Flush Sampling Kit
Part number: ABS019F/25
Used when the aspirating pipe work is above a suspended ceiling, the flush head is fixed to the ceiling tile with the supplied nut and linked to the pipework using a two meter length of 10mm OD tubing and a capillary Tpiece which links into the pipe.

Price: £6.5
ABS Flush Sampling Kit 27mm
Part number: ABS019F-27
Used when the aspirating pipe work is above a suspended ceiling, the flush head is fixed to the ceiling tile with the supplied nut and linked to the pipework using a two meter length of 10mm OD tubing and a capillary Tpiece which links into the pipe.
Price: £0.4
ABS Jointing Socket 25mm
Part number: ABSG005-25
Connects two pieces of aspirating smoke detection pipe together.
Price: £0.4
ABS Jointing Socket 25mm
Part number: ABS005-25
Connects two pieces of aspirating smoke detection pipe together.


Price: £0.4
ABS Jointing Socket 25mm
Part number: WABS005-25
Connects two pieces of aspirating smoke detection pipe together.
Price: £2.85
ABS Pipe 3M Length 25mm
Part number: WABS008-25
3 Meter ABS 25mm aspirating smoke detection pipe EN54-20 approved.
Price: £2.85
ABS Pipe 3M Length 25mm
Part number: ABS008-25
3 Meter ABS 25mm aspirating smoke detection pipe EN54-20 approved
•Colour RED with WHITE text "Air Sampling Pipe do not cut or paint"


View Related Products

Price: £0.85
ABS Sharp 90 Degree Bend
Part number: PIPG-017
Designed for changing the direction of a pipe run at 90 degree’s on an aspirating smoke detection pipe network.
Price: £0.85
ABS Sharp 90 Degree Bend
Part number: PIP-017
Designed for changing the direction of a pipe run at 90 degree’s on an aspirating smoke detection pipe network.



Price: £0.85
ABS Sharp 90 Degree Bend
Part number: WPIP-017
Designed for changing the direction of a pipe run at 90 degree’s on an aspirating smoke detection pipe network.
Price: £2.5
ABS Socket Union 25mm
Part number: WABS003-25
Used for breaking a section of aspirating smoke detection pipe network for maintenance purposes.
Price: £2.5
ABS Socket Union 25mm
Part number: ABS003-25
Used for breaking a section of aspirating smoke detection pipe network for maintenance purposes.



Price: £2.5
ABS Socket Union 25mm
Part number: ABSG003-25
Used for breaking a section of aspirating smoke detection pipe network for maintenance purposes.

Price: £2.2
ABS Tee 25mm
Part number: WABS006-25
This device is used when a “Bull nose” or “Side tee” flow split is required.
Price: £2.2
ABS Tee 25mm
Part number: ABS006-25
This device is used when a “Bull nose” or “Side tee” flow split is required.



Price: £2.2
ABS Tee 25mm
Part number: ABSG006-25
This device is used when a “Bull nose” or “Side tee” flow split is required.

Price: £3.5
ABS Tee Adaptor 25/10mm
Part number: PIPG-016
Used to connect the aspirating pipe to 10mm OD flexible nylon tubing.
Price: £3.5
ABS Tee Adaptor 25/10mm
Part number: PIP-016
Used to connect the aspirating pipe to 10mm OD flexible nylon tubing.


Price: £3.5
ABS Tee Adaptor 25/10mm
Part number: PIP-016
Used to connect the aspirating pipe to 10mm OD flexible nylon tubing.


Price: £3.5
ABS Tee Adaptor 25/10mm
Part number: WPIP-016
Used to connect the aspirating pipe to 10mm OD flexible nylon tubing.
Price: £12
Bell - 24 Volt 6" Motorised
Part number: MBF-6CV-24
The bell remains the most commonly used alarm for fire evacuation systems. Recognising this, Vimpex continue to innovate with their all-aluminium range of fire alarm bells.

Five bells make up the range of 150mm (6 inch) and 200mm (8 inch) internal and external units. Being of aluminium construction, our bells have a very high volume output matched with extremely low power consumption - just 11mA for the 150mm internal.

The specially designed weatherproof bells have an aluminium back box giving either single or double threaded entry for maximum flexibility in installation. This is supplied as a full fixing kit with gasket and screws.




Price: £50
Blanking Plug
Part number: VSP-998
VESDA-E VEA Blanking Plugs (Pack of 50)
Blanking plugs are used to block the unused ports on VEA
Price: £0.2
Discrete Head Only
Part number: 222-059
A non-intrusive sampling point.

Price: £0.2
Discrete Head Only
Part number: 222-059
A non-intrusive sampling point.

Price: £0.2
Discrete Head Only
Part number: W222-059
A non-intrusive sampling point.

Price: £0.2
Discrete Head Only
Part number: W222-059
A non-intrusive sampling point.

Price: £12.5
Flexi Bend 1M
Part number: PIP-021
Soft PVC hose with embedded steel wire reinforcement. Very flexible, strong, abrasion resistant, smooth inside and outside.

Price: £12.5
Flexi Bend 1M
Part number: PIPG-021
Soft PVC hose with embedded steel wire reinforcement. Very flexible, strong, abrasion resistant, smooth inside and outside.


Price: £12.5
Flexi Bend 1m
Part number: WPIP-021
Soft PVC hose with embedded steel wire reinforcement. Very flexible, strong, abrasion resistant, smooth inside and outside.
Price: £10.5
Flexi Bend 30cm
Part number: WPIP-026
Soft PVC hose with embedded steel wire reinforcement. Very flexible, strong, abrasion resistant, smooth inside and outside.
Price: £10.5
Flexi Bend 30cm
Part number: PIPG-026
Soft PVC hose with embedded steel wire reinforcement. Very flexible, strong, abrasion resistant, smooth inside and outside.
Price: £10.5
Flexi Bend 30cm
Part number: PIP-026
Soft PVC hose with embedded steel wire reinforcement. Very flexible, strong, abrasion resistant, smooth inside and outside.

Price: £0
FSPF-St/St
Part number: FSPF-St/St

Price: £58.8
Gas Hold off button
Part number: K91000M10
The K91000M10 Hold Off Unit provides a robust and convenient point to apply a temporary hold to release of fire protection extinguishant release. The robust pushbutton is shrouded to prevent accidental operation and is coloured to comply with the requirements of BS7273-1.
Housed in an attractive surface mounting single gang enclosure, the unit is suitable for flush mounting to a standard single gang back box.



Price: £2.5
Hochiki - Conventional Schottky Base
Part number: YBN-R/6SK
Model YBN-R/6SK features an in-line Schottky Diode, providing line continuity during detector removal (Call Points can be wired in any order on the zone providing a suitable panel and End Of Line (EOL) unit is used). The integrated third terminal provides remote indicator output.



Price: £17
Hochiki - Conventional Smoke Detector
Part number: SLR-E3
The SLR-E3N is a Photoelectric Smoke Detector, which is fully compatible with the majority of existing Conventional systems.
The SLR-E3N incorporates Hochiki’s unique High Performance photoelectric smoke chamber removing the need to use Ionisation Detectors in the majority of applications. An integral third terminal provides a remote indicator output.
The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light.


Price: £29
Hochiki - Manual Call Point - RED
Part number: HCP-E
Model HCP-E(SCI) is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit incorporates a bi- coloured LED, which can be selected as pulsing/non-pulsing*1 for communications polling and is continuously lit when the HCP-E(SCI) is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.
The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required (sold separately). An optional glass element is also available.



Price: £499
Hot Wire Test Box
Part number: VTT-10000
Xtralis Test Transformer VTT-10000 (previously known as the Hot Wire Test – Power Supply Unit (PSU)) is a tool used to test very early warning aspirated smoke detection equipment.
The unit generates a high current that passes through a test cable in order to heat it, which in turn causes its insulation to burn giving off smoke.
The maximum operating time for the unit is three minutes and then it must be left immediately to cool it off for a period of at least seven minutes.
On State: When the unit is turned on, the “POWER” indicator flashes a green light and the power is applied to the output terminals until the set time has elapsed.
Off State: Once the timer has timed out, the output is switched off and the “OUT” indicator illuminates a red light while the “POWER” indicator remains illuminated.




View Related Products

Price: £413
OSID 10
Part number: OSI-10
OSID (Open-area Smoke Imaging Detector) combines dual wavelength (IR and UV) beams with CMOS imaging detection. This technology features high tolerance to vibration and structural movement and OSID differentiates better between smoke and environmental conditions than traditional beam detectors. OSID operates in both pitch dark as well as bright sunlight.

OSID-10 Imager 8° FOV

Distance 30-150 m with OSE-SP/W.
This configuration is for a 1 on 1 system.
The OSI-10 is not suited to work with High Powered Emitters.




Price: £427
OSID 90
Part number: OSI-90
OSID (Open-area Smoke Imaging Detector) combines dual wavelength (IR and UV) beams with CMOS imaging detection. This technology features high tolerance to vibration and structural movement and OSID differentiates better between smoke and environmental conditions than traditional beam detectors. OSID operates in both pitch dark as well as bright sunlight.

OSI-90 Imager 80° FOV

Distance 6-34 m with OSE-SP/W
Distance 12-68 m with OSE-HPW
Distance 12-50 m with OSE-HP-01
The OSI-90 can operate with up to 7 Emitters.



Price: £440
OSID Emitter H/P
Part number: OSE-HPW
OSE-HPW Emitter High Power Wired 24 Vdc

Allows to double the detection ranges of the OSI-45 and OSI- 90.



Price: £200
OSID Emitter S/P
Part number: OSE-SP
OSE-SP Emitter battery powered-alkaline battery
Using battery powered Emitters, with a guaranteed 5 year life, drastically reduce the wiring and installation costs.



Price: £200
OSID Emitter S/P W/R
Part number: OSE-SPW
OSE-SPW Emitter Wired 24 Vdc
A preferred solution when 24 Vdc is close by.



Price: £360
OSID Installation Kit
Part number: INST
OSID Installation Kit
Kit including laser alignment tool, test filter, PC cable, cleaning cloth, reflectors and manual.



Price: £70
RA Joiner 4mm
Part number: VSP-1004
VESDA-E VEA RA Joiner 4mm (Pack of 10)
Price: £50
RA Joiner 6mm
Part number: VSP-1003
VESDA-E-VEA RA Joiner 6mm (Pack of 10)
Price: £86
Reducer
Part number: VSP-1000
Reducer 4mm-6mm (Pack of 10)
Price: £59.99
Refrigerated Storage Sampling Kit
Part number: VSP-860
Refrigerated Storage Sampling Kit provides a standardised method of smoke sampling for Refrigerated Storage facilities in a considerably improved manner allowing simplified installation with reduced maintenance, thus promoting more reliable and hassle-free operation.
Refrigerated Storage Sampling Kit has been designed to replace standard cone-shaped sampling nozzles installed at the ceiling in existing or new Refrigerated Storage facilities.
This kit can be installed in the entire facility or combined with standard sampling points if required. The aim here is to reduce direct ice blockage of the sampling points hence this kit is recommended for installation in areas where higher humidity is likely to occur as a result of vehicle and pedestrian traffic (e.g. areas close to doorways or perimeter of the facility).
Price: £59.99
Refrigerated Storage Sampling Kit
Part number: VSP-860
Refrigerated Storage Sampling Kit provides a standardised method of smoke sampling for Refrigerated Storage facilities in a considerably improved manner allowing simplified installation with reduced maintenance, thus promoting more reliable and hassle-free operation.
Refrigerated Storage Sampling Kit has been designed to replace standard cone-shaped sampling nozzles installed at the ceiling in existing or new Refrigerated Storage facilities.
This kit can be installed in the entire facility or combined with standard sampling points if required. The aim here is to reduce direct ice blockage of the sampling points hence this kit is recommended for installation in areas where higher humidity is likely to occur as a result of vehicle and pedestrian traffic (e.g. areas close to doorways or perimeter of the facility).
Price: £59.99
Refrigerated Storage Sampling Kit
Part number: VSP-860
Refrigerated Storage Sampling Kit provides a standardised method of smoke sampling for Refrigerated Storage facilities in a considerably improved manner allowing simplified installation with reduced maintenance, thus promoting more reliable and hassle-free operation.
Refrigerated Storage Sampling Kit has been designed to replace standard cone-shaped sampling nozzles installed at the ceiling in existing or new Refrigerated Storage facilities.
This kit can be installed in the entire facility or combined with standard sampling points if required. The aim here is to reduce direct ice blockage of the sampling points hence this kit is recommended for installation in areas where higher humidity is likely to occur as a result of vehicle and pedestrian traffic (e.g. areas close to doorways or perimeter of the facility).
Price: £59.99
Refrigerated Storage Sampling Kit
Part number: VSP-860
Refrigerated Storage Sampling Kit provides a standardised method of smoke sampling for Refrigerated Storage facilities in a considerably improved manner allowing simplified installation with reduced maintenance, thus promoting more reliable and hassle-free operation.
Refrigerated Storage Sampling Kit has been designed to replace standard cone-shaped sampling nozzles installed at the ceiling in existing or new Refrigerated Storage facilities.
This kit can be installed in the entire facility or combined with standard sampling points if required. The aim here is to reduce direct ice blockage of the sampling points hence this kit is recommended for installation in areas where higher humidity is likely to occur as a result of vehicle and pedestrian traffic (e.g. areas close to doorways or perimeter of the facility).
Price: £130
Sigma XT Status Unit 6 Lamp + Mode Select and Gas Release
Part number: K911110M8
The Sigma Si range of status indicators provide detailed status information for Sigma XT/XT+ extinguishant release control equipment.
All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.



Price: £480
Sigma XT Gas Panel
Part number: K11031M2
Designed and manufactured to the highest standards in a quality controlled environment and with European EN12094-1 approvals, the Sigma XT extinguishant releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations.
With three detection zones as standard, extinguishant release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications.
The extensive configuration options of the Sigma XT allow the functionality of the system to be extensively modified while still complying with the requirements of the controlling standard for the equipment (EN12094-1, EN54-2 and EN54-4).



Price: £150
Sigma XT Satus Unit 10 Lamp - Mode Select - Gas Relase
Part number: K911113M8
The Sigma Si range of status indicators provide detailed status information for Sigma XT/XT+ extinguishant release control equipment.
All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.



Price: £120
Sigma XT Status unit 6Lamp Mode Select (No Gas Release Facility)
Part number: K911100M8
The Sigma Si range of status indicators provide detailed status information for Sigma XT/XT+ extinguishant release control equipment.
All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.



Price: £220
Sigma XT Surface status unit 10 Lamp + Mode Select and Gas Release ( IP65 External Use)
Part number: W911113W8
The Sigma Si range of status indicators provide detailed status information for Sigma XT/XT+ extinguishant release control equipment.
All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.



Price: £190
Sigma XT Surface status unit 6 Lamp + Mode Select and Gas Release (IP65 External Use)
Part number: W911110W8
The Sigma Si range of status indicators provide detailed status information for Sigma XT/XT+ extinguishant release control equipment.
All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.



Price: £35
Silencer
Part number: PIP-039

Price: £35
Silencer
Part number: PIP-039

Price: £35
Silencer
Part number: PIP-039W

Price: £16
Single Standard Sampling Point 4mm
Part number: VSP-981-B
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.
Price: £10
Single Standard Sampling Point 4mm
Part number: VSP-981-W
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.

Price: £10
Single Standard Sampling Point 6mm
Part number: VSP-980-W
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.

Price: £16
Single Standard Sampling Point 6mm
Part number: VSP-980-B
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.


Price: £10
Single Surface Mount Sampling Point 4mm
Part number: VSP-983-W
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.

Price: £16
Single Surface Mount Sampling Point 4mm
Part number: VSP-983-B
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.

Price: £16
Single Surface Mount Sampling Point 6mm
Part number: VSP-982-W
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.
Price: £16
Single Surface Mount Sampling Point 6mm
Part number: VSP-982-B
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.


Price: £21.25
Smoke-Pen
Part number: SP-1
Smoke-Pen Provides controllable smoke, these are a great replacement for smoke matches or smoke pellets.

View Related Products

Price: £358
Standard Sampling Point 4mm (Pack of 22)
Part number: VSP-981-B22
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.
Price: £220
Standard Sampling Point 4mm (Pack of 22)
Part number: VSP-981-W22
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.

Price: £220
Standard Sampling Point 6mm (Pack of 22)
Part number: VSP-980-W22
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.
Price: £358
Standard Sampling Point 6mm (Pack of 22)
Part number: VSP-980-B22
Standard sampling points are designed for a ceiling with a void where microbore tubes are run in the void and sampling points are mounted in the ceiling. Sampling points can either be directly screwed to the ceiling or mounted using a retainer supplied as a standard inclusion.

Standard sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes. The inlet has a swivel joint to allow exible orientation of the tube. The standard sampling points allow blind mounting removing any need to access the ceiling void once the microbore tubes are installed and passed through the ceiling.

Price: £60
Straight Union 4mm
Part number: VSP-1002
VESDA-E VEA Straight Union 4mm (Pack of 10)
Price: £46
Straight Union 6mm
Part number: VSP-1001
VESDA-E VEA Straight Union 6mm (Pack of 10)
Price: £220
Surface Mount Sampling Point 4mm (Pack of 22)
Part number: VSP-983-W22
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.
Price: £358
Surface Mount Sampling Point 4mm (Pack of 22)
Part number: VSP-983-B22
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.
Price: £220
Surface Mount Sampling Point 6mm (Pack of 22)
Part number: VSP-982-W22
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.
Price: £358
Surface Mount Sampling Point 6mm (Pack of 22)
Part number: VSP-982-B22
Surface mount sampling points are designed for use where access to the ceiling void is limited.
Microbore tubes are run along the ceiling, visible in the protected area. These sampling points are screwed directly to the ceiling. Surface mount sampling points are available in black or white with 4mm or 6mm inlets to suit appropriate microbore tubes.

Price: £226
Tube Reel 4mm
Part number: VSP-991
VESDA-E VEA Microbore Tube Reel 4mm
Price: £4000
Vesda - VLI - laser Industrail Ethernet Only
Part number: VLI-880
The VLI detector combines a fail-safe Intelligent Filter (patent pending)with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for re-calibration. The Intelligent Filter: effectively reduces the level of pollution in the air sample before it enters the detection chamber, which dramatically extends the operational life of • Ultrasonic low sensing the detector in harsh and polluted environments.

• Stand alone - Relays only NOT VESDAnet
• VLI compatible
• Ethernet Compatible
Price: £4200
Vesda - VLI Laser Industrial VesdaNET
Part number: VLI-885
The Industrial VESDA VLI by Xtralis is the first very early warning aspirating smoke detector purpose-built for the protection of industrial applications of up to 2,000 square meters (20,000 sq. ft.). Housed in a ruggedized industrial enclosure and incorporating patented long-life, fail-safe filter technology along with other best-in-class VESDA features, the VLI sets a new benchmark for the protection of industrial applications. The detector showcases a host of features specifically designed to address the common challenges of industrial applications such as high background levels of airborne particles, detector longevity and deterministic maintenance.


Price: £270
Vesda Analytics Diesel Trace Licence
Part number: VSW-802
DieselTrace is an optional software analytics that can be licensed for the VESDA-E series of aspirating smoke detectors. It provides targeted detection of diesel engine exhaust particles in abnormal scenarios, such as when a diesel engine is not fitted with particle filters, or the particle filter fitted to a diesel engine malfunctions.

Realtime monitoring is possible with Xtralis VSM4, the PC-based solution
for integrated control and monitoring of Xtralis very early warning smoke detection systems, and iVESDA, a mobile application for iOS® and AndroidTM platforms. Notification of analytics events is provided via Xtralis VSM4, iVESDA, Xtralis VSC or a VESDA-E Analytics Relay Module VRT-X00*.



Price: £270
Vesda Analytics Diesel Trace Licence
Part number: VSW-802
DieselTrace is an optional software analytics that can be licensed for the VESDA-E series of aspirating smoke detectors. It provides targeted detection of diesel engine exhaust particles in abnormal scenarios, such as when a diesel engine is not fitted with particle filters, or the particle filter fitted to a diesel engine malfunctions.

Realtime monitoring is possible with Xtralis VSM4, the PC-based solution
for integrated control and monitoring of Xtralis very early warning smoke detection systems, and iVESDA, a mobile application for iOS® and AndroidTM platforms. Notification of analytics events is provided via Xtralis VSM4, iVESDA, Xtralis VSC or a VESDA-E Analytics Relay Module VRT-X00*.



Price: £270
Vesda Analytics Dust Trace Licence
Part number: VSW-801
DustTrace Software Analytics

DustTrace is an optional software analytics that can be licensed for the VESDA-E series of aspirating smoke detectors. It provides targeted detection of dust which is present in the sampled air.

Realtime monitoring is possible with Xtralis VSM4, the PC-based solution
for integrated control and monitoring of Xtralis very early warning smoke detection systems, and iVESDA, a mobile application for iOS® and AndroidTM platforms. Notification of analytics events is provided via Xtralis VSM4, iVESDA, Xtralis VSC or a VESDA-E Analytics Relay Module VRT-X00



Price: £270
Vesda Analytics Dust Trace Licence
Part number: VSW-801
DustTrace Software Analytics

DustTrace is an optional software analytics that can be licensed for the VESDA-E series of aspirating smoke detectors. It provides targeted detection of dust which is present in the sampled air.

Realtime monitoring is possible with Xtralis VSM4, the PC-based solution
for integrated control and monitoring of Xtralis very early warning smoke detection systems, and iVESDA, a mobile application for iOS® and AndroidTM platforms. Notification of analytics events is provided via Xtralis VSM4, iVESDA, Xtralis VSC or a VESDA-E Analytics Relay Module VRT-X00



Price: £270
Vesda Analytics Wire Trace Licence
Part number: VSW-803
WireTrace Software Analytics

WireTrace is an optional software analytics that can be licensed for the VESDA-E series of aspirating smoke detectors. It provides targeted detection of particles released from slowly overheating PVC insulated wires. Detection of such particles will direct threat investigation to the primary source (i.e. electrical wires and/or cables), resulting in a faster response for ultimate asset protection and ensuring business continuity.

Realtime monitoring is possible with Xtralis VSM4, the PC-based solution
for integrated control and monitoring of Xtralis very early warning smoke detection systems, and iVESDA, a mobile application for iOS® and AndroidTM platforms. Notification of analytics events is provided via Xtralis VSM4, iVESDA, Xtralis VSC or a VESDA-E Analytics Relay Module VRT-X00*.



Price: £270
Vesda Analytics Wire Trace Licence
Part number: VSW-803
WireTrace Software Analytics

WireTrace is an optional software analytics that can be licensed for the VESDA-E series of aspirating smoke detectors. It provides targeted detection of particles released from slowly overheating PVC insulated wires. Detection of such particles will direct threat investigation to the primary source (i.e. electrical wires and/or cables), resulting in a faster response for ultimate asset protection and ensuring business continuity.

Realtime monitoring is possible with Xtralis VSM4, the PC-based solution
for integrated control and monitoring of Xtralis very early warning smoke detection systems, and iVESDA, a mobile application for iOS® and AndroidTM platforms. Notification of analytics events is provided via Xtralis VSM4, iVESDA, Xtralis VSC or a VESDA-E Analytics Relay Module VRT-X00*.



Price: £87.75
Vesda Detector Recessed Mount Kit
Part number: VSP-011
VSP-011 Vesda recess mounting kit for a Vesda Laser Plus or Vesda Laser Scanner Detector.
Price: £333.45
Vesda Display
Part number: VSP-002
VSP002 - Vesda Display Module for Vesda Laser Plus
Display modules provide real-time indication of the status of a VESDA
detector. They have a 20-segment vertical bar graph display, a 2 digit numeric
display, an audible sounder, clear alarm and fault indicators. They also have 4
push button keys to control the detector and the mode of the display
.
The Display Module can be mounted into a detector unit, a remote mounting
box or a 19in sub rack. Several displays can be configured to display
information from a single detector in multiple locations
Price: £38.6
Vesda Filter Cartridge
Part number: VSP-005

VESDA FilterThe VSP-005 VESDA Filter is a service replaceable item used on most VESDA detectors.

Compatibility:-
LaserCOMPACT
LaserPLUS VLP
LaserFOCUS
LaserSCANNER VLS

PLEASE NOTE: A programming device may be required to reset the filter counts once the filter is replaced

Price: £38.6
Vesda Filter Cartridge
Part number: VSP-005

VESDA FilterThe VSP-005 VESDA Filter is a service replaceable item used on most VESDA detectors.

Compatibility:-
LaserCOMPACT
LaserPLUS VLP
LaserFOCUS
LaserSCANNER VLS

PLEASE NOTE: A programming device may be required to reset the filter counts once the filter is replaced

Price: £38.6
Vesda Filter Cartridge
Part number: VSP-005

VESDA FilterThe VSP-005 VESDA Filter is a service replaceable item used on most VESDA detectors.

Compatibility:-
LaserCOMPACT
LaserPLUS VLP
LaserFOCUS
LaserSCANNER VLS

PLEASE NOTE: A programming device may be required to reset the filter counts once the filter is replaced

Price: £38.6
Vesda Filter Cartridge
Part number: VSP-005

VESDA FilterThe VSP-005 VESDA Filter is a service replaceable item used on most VESDA detectors.

Compatibility:-
LaserCOMPACT
LaserPLUS VLP
LaserFOCUS
LaserSCANNER VLS

PLEASE NOTE: A programming device may be required to reset the filter counts once the filter is replaced

Price: £38.6
Vesda Filter Cartridge
Part number: VSP-005

VESDA FilterThe VSP-005 VESDA Filter is a service replaceable item used on most VESDA detectors.

Compatibility:-
LaserCOMPACT
LaserPLUS VLP
LaserFOCUS
LaserSCANNER VLS

PLEASE NOTE: A programming device may be required to reset the filter counts once the filter is replaced

Price: £5
Vesda Filter Cover Door
Part number: VSP-019
VSP-019 Replacement filter door cover for Vesda Laser Plus or Scanner.
Price: £732.6
Vesda Focus 250 - VLF250
Part number: VLF-250

The VLF-250 model protects areas up to 250 Sq/m
Builtin Display for instant event recognition, Fire Level, Fault analysis
Out of the box operation
Ultrasonic airflow sensing
18000 Event log recording
Programmable Alarm Thresholds

EN 54-20
Class A (12 holes / 0.12% obs/m)
Class B (12 holes / 0.35% obs/m)
Class C (12 holes / 0.80% obs/m)

Listings/Approvals
UL, ULC, FM, CFE, LPCB, VdS, VNIIPO, AFNOR, ActivFire, CE - EMC and CPD



View Related Products

Price: £940.95
Vesda Focus 500 - VLF500
Part number: VLF-500


The VLF-500 model protects areas up to 500 Sq/m
Builtin Display for instant event recognition, Fire Level, Fault analysis
Out of the box operation
Ultrasonic airflow sensing
18000 Event log recording
Programmable Alarm Thresholds

EN 54-20
Class A (30 holes / 0.05% obs/m)
Class B (30 holes / 0.15% obs/m)
Class C (30 holes / 0.32% obs/m)

Listings/Approvals
UL, ULC, FM, CFE, LPCB, VdS, VNIIPO, AFNOR, ActivFire, CE - EMC and CPD


View Related Products

Price: £491.4
Vesda Hand Held Programmer
Part number: VHH-100

VESDA Hand Held Programmer

The VHH-100 Hand Held Programmer is a network programmer used to program and maintain ANY VesdaNET enabled Detector. The programmer is supplied complete with leads.

The programmer is detachable from the detector and can be kept in an Engineers tool bag for use across multiple Vesda installations.

Suitable for use on:

  • LaserCOMPACT VN
  • LaserPLUS Range
  • LaserSCANNER Range


View Related Products

Price: £491.4
Vesda Hand Held Programmer
Part number: VHH-100

VESDA Hand Held Programmer

The VHH-100 Hand Held Programmer is a network programmer used to program and maintain ANY VesdaNET enabled Detector. The programmer is supplied complete with leads.

The programmer is detachable from the detector and can be kept in an Engineers tool bag for use across multiple Vesda installations.

Suitable for use on:

  • LaserCOMPACT VN
  • LaserPLUS Range
  • LaserSCANNER Range


View Related Products

Price: £451.95
Vesda High Level Interface
Part number: VHX-0200

VESDA HLI PC-Link Interface

The VHX-0200 HLI (High Level Interface) is a PC Interface used to program and maintain ANY VesdaNET enabled Detector. The programmer is supplied complete with leads, USB to Serial Interface and the VSC programming / maintenance software.

The HLI provides additional features not found on the Hand Held Programmer such as the ability to download log files, view smoke trend graphs and save configurations offline.

Suitable for use on:

  • LaserCOMPACT VN
  • LaserPLUS Range
  • LaserSCANNER Range

Price: £451.95
Vesda High Level Interface
Part number: VHX-0200

VESDA HLI PC-Link Interface

The VHX-0200 HLI (High Level Interface) is a PC Interface used to program and maintain ANY VesdaNET enabled Detector. The programmer is supplied complete with leads, USB to Serial Interface and the VSC programming / maintenance software.

The HLI provides additional features not found on the Hand Held Programmer such as the ability to download log files, view smoke trend graphs and save configurations offline.

Suitable for use on:

  • LaserCOMPACT VN
  • LaserPLUS Range
  • LaserSCANNER Range

Price: £654.7
Vesda High Level Interface and VesdaNet Socket
Part number: VHX-1200
Provides a permanent connection port to a VESDAnet network in a convenient location, allowing easy access for maintenance and troubleshooting. An additional VESDAnet socket is not required

• Direct access and monitoring of VESDAnet system
• Easily configured using Xtralis configuring and monitoring software packages
• Seamless data transfer
Price: £654.7
Vesda High Level Interface and VesdaNet Socket
Part number: VHX-1200
Provides a permanent connection port to a VESDAnet network in a convenient location, allowing easy access for maintenance and troubleshooting. An additional VESDAnet socket is not required

• Direct access and monitoring of VESDAnet system
• Easily configured using Xtralis configuring and monitoring software packages
• Seamless data transfer
Price: £135
Vesda In-Line Filter Elements (20pk)
Part number: VSP-855-20
The Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of air- borne contaminants in a simple and cost-effective manner.



Price: £36
Vesda In-Line Filter Elements (4pk)
Part number: VSP-855-4
The Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of air- borne contaminants in a simple and cost-effective manner.



Price: £78
Vesda In-Line Filter Grey
Part number: VSP-850-G
The Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of air- borne contaminants in a simple and cost-effective manner.



Price: £78
Vesda In-Line Filter Red
Part number: VSP-850-R
The Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of air- borne contaminants in a simple and cost-effective manner.



Price: £222.75
Vesda Laser Compact Aspirator
Part number: VSP-501

Replacement Aspirator fan unit for Vesda Laser Compact VLC500RO, VLC505VN and VLC400AP
Price: £222.75
Vesda Laser Compact Aspirator
Part number: VSP-501

Replacement Aspirator fan unit for Vesda Laser Compact VLC500RO, VLC505VN and VLC400AP
Price: £1599.99
Vesda Laser Plus Chassis
Part number: VLP-006
VESDA VLP Detector Chassis Assembly, includes manifold.
Price: £135
Vesda Multi-Function Control Card
Part number: VIC-020
The VESDA VLF Multi-function Control Card (MCC) is an interface card for the range of VESDA VLF by Xtralis aspirating smoke detectors. An MCC expands the range of input and output communications a VESDA VLF can perform.


Price: £180
Vesda Multi-Function Control Card with MPO
Part number: VIC-030
The VESDA VLF Multi-function Control Card (MCC) is an interface card for the range of VESDA VLF by Xtralis aspirating smoke detectors. An MCC expands the range of input and output communications a VESDA VLF can perform.


Price: £661.5
Vesda PC Link High Level Interface (Open Protocol)
Part number: VHX-0300
A VESDA High Level Interface (HLI) enables connection between a VESDAnet and configuration and monitoring platforms. Two main models are available: 1) Sliding Windows HLI, which enables communication between a VESDAnet and configuration and monitoring software packages Xtralis VSC and Xtralis VSM4 and 2) Open Protocol HLI, which integrates a VESDAnet to third-party software packages, building management systems (BMSs) and fire alarm control panels (FACPs). These HLIs are available in a plastic portable housing, which can be used in multiple sites, and a fixed wall-mounted configuration to provide a permanent connection in a convenient location at one site.
Price: £661.5
Vesda PC Link High Level Interface (Open Protocol)
Part number: VHX-0300
A VESDA High Level Interface (HLI) enables connection between a VESDAnet and configuration and monitoring platforms. Two main models are available: 1) Sliding Windows HLI, which enables communication between a VESDAnet and configuration and monitoring software packages Xtralis VSC and Xtralis VSM4 and 2) Open Protocol HLI, which integrates a VESDAnet to third-party software packages, building management systems (BMSs) and fire alarm control panels (FACPs). These HLIs are available in a plastic portable housing, which can be used in multiple sites, and a fixed wall-mounted configuration to provide a permanent connection in a convenient location at one site.
Price: £148.5
Vesda Power Supply 1.5amp
Part number: VPS-215

VESDA VPS-215 Power Supply Unit

A 1.5Amp EN54 Approved Power Supply Unit designed to compliment the range of VESDA aspirating smoke detectors.

Suitable for use on:

  • LaserCOMPACT
  • LaserFOCUS 250/500
  • Remote Displays

Price: £183.6
Vesda Power Supply 2amp
Part number: VPS-220

VESDA VPS-220 Power Supply Unit

A 2Amp EN54 Approved Power Supply Unit designed to compliment the range of VESDA aspirating smoke detectors.

Suitable for use on:

  • Vesda-E VEP
  • LaserPLUS Range
  • LaserSCANNER Range
  • LaserFOCUS 500

Price: £333.45
Vesda Programmer
Part number: VSP-001

VSP001 - VESDA Programmer Module allows direct access to all VESDAnet devices on a VESDANet smoke detection network.
Allow across network detector configuration
Detector status reporting
This device is suitable for upgrading a VESDA VLP400 and VLP002

View Related Products

Price: £333.45
Vesda Programmer
Part number: VSP-001

VSP001 - VESDA Programmer Module allows direct access to all VESDAnet devices on a VESDANet smoke detection network.
Allow across network detector configuration
Detector status reporting
This device is suitable for upgrading a VESDA VLP400 and VLP002

View Related Products

Price: £484.6
Vesda Remote Compact Displays 7 Relays
Part number: VRT-J00

Vesda - Remote Display Module c/w 7 Relays and Enclosure

• VESDANet Compatible
• 7 Programmable Relays
• Vesda LaserCompact VLC505 Compatible only
• Remote Relay Option
• 20-Segment Vertical Bar Graph Display
• Built-In Sounder for Audible Warning
• Multi-mode Numeric Display (defaults to smoke obscuration)
• High Intensity Alarm LEDs
• Recessed Mounting Option
• Allows Zone Control of Assigned VESDA Detector
• Comprehensive Fault Reporting
• Provides Immediate Status Reporting for a Single VESDA Zone
• Alarm Threshold Indicators
Price: £484.6
Vesda Remote Compact Displays 7 Relays
Part number: VRT-J00

Vesda - Remote Display Module c/w 7 Relays and Enclosure

• VESDANet Compatible
• 7 Programmable Relays
• Vesda LaserCompact VLC505 Compatible only
• Remote Relay Option
• 20-Segment Vertical Bar Graph Display
• Built-In Sounder for Audible Warning
• Multi-mode Numeric Display (defaults to smoke obscuration)
• High Intensity Alarm LEDs
• Recessed Mounting Option
• Allows Zone Control of Assigned VESDA Detector
• Comprehensive Fault Reporting
• Provides Immediate Status Reporting for a Single VESDA Zone
• Alarm Threshold Indicators
Price: £525.15
Vesda Remote Display 7 Relays
Part number: VRT-200
VESDA VRT200 Remote Display provides real-time indication of the status of a remote VESDA detector.
Includes a 20-segment vertical bar graph display
2 digit numeric display, an audible sounder, clear alarm and fault indicators.
4 Control Buttons
The Display Module can be mounted into a detector unit, a remote mounting box or a 19in sub rack.
Several displays can be configured to display information from a single detector in multiple locations.



Price: £525.15
Vesda Remote Display 7 Relays
Part number: VRT-200
VESDA VRT200 Remote Display provides real-time indication of the status of a remote VESDA detector.
Includes a 20-segment vertical bar graph display
2 digit numeric display, an audible sounder, clear alarm and fault indicators.
4 Control Buttons
The Display Module can be mounted into a detector unit, a remote mounting box or a 19in sub rack.
Several displays can be configured to display information from a single detector in multiple locations.



Price: £477.9
Vesda Remote Display no Relays
Part number: VRT-600
Display modules provide real-time indication of the status of a VESDA detector. They have a 20-segment vertical bar graph display, a 2 digit numeric display, an audible sounder, clear alarm and fault indicators. They also have 4 push button keys to control the detector and the mode of the display.
The Display Module can be mounted into a detector unit, a remote mounting box or a 19in sub rack. Several displays can be configured to display information from a single detector in multiple locations.



Price: £494.1
Vesda Remote Programmer
Part number: VRT-100
The programmer module allows direct access to all Vesdanet devices on a Vesda Smoke Detection System. It also allows configuration and status reporting of Detectors, Displays and Interfaces.
Price: £380
Vesda Remote Relays
Part number: VRT-500
Remote Relay Module complete with 7 Relays and Enclosure

• VesdaNet Ready
• Vesda LaserPlus Compatible
• 7 Programmable Relays
Price: £541.8
Vesda Remote Scanner Display 12 Relays
Part number: VRT-800
Vesda -
Remote Scanner Display complete with Enclosure and 12 Relays

• 12 Programmable Relays
• Vesda LaserScanner Compatible
• VesdaNet Ready
• Provides Immediate Status Reporting for a Single VESDA Zone
• High Intensity Alarm LEDs
• 20-Segment Vertical Bar Graph Display
• Built-In Sounder for Audible Warning
• Multi-mode Numeric Display (defaults to smoke obscuration)
• Recessed Mounting Option
• Allows Zone Control of Assigned VESDA Detector
• Comprehensive Fault Reporting
• Alarm Threshold Indicators
• Remote Relay Option



Price: £541.8
Vesda Remote Scanner Display 12 Relays
Part number: VRT-800
Vesda -
Remote Scanner Display complete with Enclosure and 12 Relays

• 12 Programmable Relays
• Vesda LaserScanner Compatible
• VesdaNet Ready
• Provides Immediate Status Reporting for a Single VESDA Zone
• High Intensity Alarm LEDs
• 20-Segment Vertical Bar Graph Display
• Built-In Sounder for Audible Warning
• Multi-mode Numeric Display (defaults to smoke obscuration)
• Recessed Mounting Option
• Allows Zone Control of Assigned VESDA Detector
• Comprehensive Fault Reporting
• Alarm Threshold Indicators
• Remote Relay Option



Price: £467
Vesda Remote Scanner Display 7 Relays
Part number: VRT-400
The VESDA display module monitors and reports the status of a detector, providing visual representation of smoke levels along with all alarm and fault conditions. The menu-driven VESDA Programmer allows the user to conveniently configure, commission and maintain the VESDA system, as well as program each individual detector.



Price: £467
Vesda Remote Scanner Display 7 Relays
Part number: VRT-400
The VESDA display module monitors and reports the status of a detector, providing visual representation of smoke levels along with all alarm and fault conditions. The menu-driven VESDA Programmer allows the user to conveniently configure, commission and maintain the VESDA system, as well as program each individual detector.



Price: £333.45
Vesda Scanner Display
Part number: VSP-004
VSP-004 Display Module for a Vesda Laser Scanner.
Display modules provide real-time indication of the status of a VESDA
detector. They have a 20-segment vertical bar graph display, a 2 digit numeric
display, an audible sounder, clear alarm and fault indicators. They also have 4
push button keys to control the detector and the mode of the display
.
The Display Module can be mounted into a detector unit, a remote mounting
box or a 19in sub rack. Several displays can be configured to display
information from a single detector in multiple locations
Price: £333.45
Vesda Scanner Display
Part number: VSP-004
VSP-004 Display Module for a Vesda Laser Scanner.
Display modules provide real-time indication of the status of a VESDA
detector. They have a 20-segment vertical bar graph display, a 2 digit numeric
display, an audible sounder, clear alarm and fault indicators. They also have 4
push button keys to control the detector and the mode of the display
.
The Display Module can be mounted into a detector unit, a remote mounting
box or a 19in sub rack. Several displays can be configured to display
information from a single detector in multiple locations
Price: £3802.95
Vesda VEA-A00 with LEDs
Part number: VEA-040-A00
The VESDA-E VEA series of detectors combine VESDA reliability and
early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors. They use patented air sampling points and multi-channel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a multi-channel addressable system, the VEA detector is able to divide a protected space into sampling locations, enabling the localization of potential sources of re for faster incident response. The detectors are suitable for protection of areas where pinpoint location of re events is essential, thus providing ideal re detection solutions for healthcare, of ces, education, retail, prisons and electrical cabinets. A wide range of features provide exibility, eld programmability, enhanced connectivity and reduced total cost of ownership

View Related Products

Price: £4209.3
Vesda VEA-A10 with 3.5" Display
Part number: VEA-040-A10
The VESDA-E VEA series of detectors combine VESDA reliability and
early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors. They use patented air sampling points and multi-channel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a multi-channel addressable system, the VEA detector is able to divide a protected space into sampling locations, enabling the localization of potential sources of re for faster incident response. The detectors are suitable for protection of areas where pinpoint location of re events is essential, thus providing ideal re detection solutions for healthcare, of ces, education, retail, prisons and electrical cabinets. A wide range of features provide exibility, eld programmability, enhanced connectivity and reduced total cost of ownership

View Related Products

Price: £2566.35
Vesda VEU with 3.5" Display
Part number: VEU-A10
The VEU series of aspirating smoke detectors are the premium detector of the VESDA-E range. An Ultra-wide sensitivity range; 15 times greater than VESDA VLP, and provision for more sampling holes provide an increased coverage in high airflow applications by at least 40%. Considerably longer linear pipe runs and extended branched pipe network configurations cater perfectly to applications with higher ceilings providing an increased coverage by up to 80% whilst allowing convenient detector mounting for ease of service and maintenance. A range of revolutionary new features provide unsurpassed detection performance, flexibility, field programmability, connectivity and reduced total cost of ownership.



Price: £2300.4
Vesda VEU with LED's
Part number: VEU-A00
The VEU series of aspirating smoke detectors are the premium detector of the VESDA-E range. An Ultra-wide sensitivity range; 15 times greater than VESDA VLP, and provision for more sampling holes provide an increased coverage in high airflow applications by at least 40%. Considerably longer linear pipe runs and extended branched pipe network configurations cater perfectly to applications with higher ceilings providing an increased coverage by up to 80% whilst allowing convenient detector mounting for ease of service and maintenance. A range of revolutionary new features provide unsurpassed detection performance, flexibility, field programmability, connectivity and reduced total cost of ownership.



Price: £336
Vesda VLI Aspirator
Part number: VSP-032
VSP-032 Vesda VLI Replacement Aspirator.
Price: £1299.99
Vesda Wall-Mounted Modbus Type 3 HLI
Part number: VHX-1420
The VESDA Modbus Type 3 High Level Interface (HLI) integrates VESDAnet network with host monitoring platforms such as Building Management Systems (BMSs) and Fire Alarm Control Panels (FACPs).

The wall-mounted version is housed in a metal enclosure allowing for permanentmounting on a flat surface. With a built-in VESDAnet interface you don’t need a remote VESDAnet socket module making the wall-mounted HLI a cost effective solution to your interface requirements.

Price: £191.7
Vesda-E STX PSU 0.5A 14AH
Part number: VPS-220-STX
Vesda-E Power Supply Units are uniquely designed to complement the style and appearance of VESDA-E aspirating smoke detectors (ASD) and are technically matched to provide sufficient current and battery charging capacity to meet the requirement of EN 54-4.

The STX variants are VdS approved and CE marked to EN54-4 so are particularly suitable for use in territories where these approvals are required. They may also be suitable in territories where ISO 7240-4 is required.

Price: £206.55
Vesda-E STX PSU 0.5A 14AH
Part number: VPS-220-STX-SLV
Vesda-E Power Supply Units are uniquely designed to complement the style and appearance of VESDA-E aspirating smoke detectors (ASD) and are technically matched to provide sufficient current and battery charging capacity to meet the requirement of EN 54-4.

The STX variants are VdS approved and CE marked to EN54-4 so are particularly suitable for use in territories where these approvals are required. They may also be suitable in territories where ISO 7240-4 is required.

Price: £275.4
Vesda-E STX PSU 2A 24AH
Part number: VPS-250-STX
Vesda-E Power Supply Units are uniquely designed to complement the style and appearance of VESDA-E aspirating smoke detectors (ASD) and are technically matched to provide sufficient current and battery charging capacity to meet the requirement of EN 54-4.

The STX variants are VdS approved and CE marked to EN54-4 so are particularly suitable for use in territories where these approvals are required. They may also be suitable in territories where ISO 7240-4 is required.

Price: £290.25
Vesda-E STX PSU 2A 24AH
Part number: VPS-250-STX-SLV
Vesda-E Power Supply Units are uniquely designed to complement the style and appearance of VESDA-E aspirating smoke detectors (ASD) and are technically matched to provide sufficient current and battery charging capacity to meet the requirement of EN 54-4.

The STX variants are VdS approved and CE marked to EN54-4 so are particularly suitable for use in territories where these approvals are required. They may also be suitable in territories where ISO 7240-4 is required.
Price: £1011.15
Vesda-E VEA 40-Local Relay StaX
Part number: VEA-040-STX
The VESDA-E VEA Local Relay StaX allows signaling of alarm location fromthe detector via relays and provides mounting of fire panel loop input modulesinside the enclosure. It is directly powered and controlled from the detector. Depending on the configuration a VEA detector can power and control up to two (2) Expansion StaX and up to three (3) Relay StaX. Each Relay StaX provides 40 relay connections corresponding to 40 tubes on a VEA detector or Expansion StaX providing full addressability.


View Related Products

Price: £51.52
Vesda-E VEP Replacement Filter
Part number: VSP-962
The VESDA-E detector uses a two-stage filter to protect the optics of the detection head. The filter is made in a compact construction and is intended for single use. The filter removes dust and other dirt from the sucked air creating a protective barrier for the optics.


View Related Products

Price: £1302.21
Vesda-E VEP-A00-1P
Part number: VEP-A00-1P
The VESDA-E VEP series of smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications. Built on the Flair detection technology and years of application experience, VEP detectors achieve consistent performance over their lifetime via absolute calibration. In addition, the VEP delivers a range of revolutionary features that provide user value.
Price: £1666.83
Vesda-E VEP-A00-P
Part number: VEP-A00-P
The VESDA-E VEP series of smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications. Built on the Flair detection technology and years of application experience, VEP detectors achieve consistent performance over their lifetime via absolute calibration. In addition, the VEP delivers a range of revolutionary features that provide user value.
Price: £1909.91
Vesda-E VEP-A10-P
Part number: VEP-A10-P
The VESDA-E VEP series of smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications. Built on the Flair detection technology and years of application experience, VEP detectors achieve consistent performance over their lifetime via absolute calibration. In addition, the VEP delivers a range of revolutionary features that provide user value.
Price: £171.45
VesdaNET Card for FOCUS
Part number: VIC-010
The VESDAnet Interface Card (VN Card) is a simple interface card for the range of VESDA VLF range.
Provides seamless VESDAnet communication from the detector to other VESDAnet devices, including configuration and monitoring tools.

Model Numbers: VIC-010

Price: £171.45
VesdaNET Card for FOCUS
Part number: VIC-010
The VESDAnet Interface Card (VN Card) is a simple interface card for the range of VESDA VLF range.
Provides seamless VESDAnet communication from the detector to other VESDAnet devices, including configuration and monitoring tools.

Model Numbers: VIC-010

Price: £14
Water Trap 25mm
Part number: VS-02-WT
Used in an environment where there are constant temperature changes, which causes condensation in the system, typically in a chill store or a room that is open to the atmosphere.