Price: £0.4
ABS Adaptor 25/27mm
Part number: ABS005-1
Connects two pieces of aspirating smoke detection pipe of different sizes 25mm to 27mm (VisaVersa).

 
Price: £0.29
ABS Clips 25/27mm
Part number: ABS004
Aspirating smoke detection pipe clip, Designed to support both 25mm and 27mm aspirating detection smoke pipe.


View Related Products

 
Price: £0.6
ABS End Cap Adaptor 27/10mm
Part number: ECA 27/10
The capillary end cap is used when it is necessary to sample air not only in the pipe run, but also at the end of the pipe run.
 
Price: £3.5
ABS Tee Adaptor 25/10mm
Part number: PIP-016
Used to connect the aspirating pipe to 10mm OD flexible nylon tubing.


 
Price: £7.5
ABS Conical Sampling Kit 27mm
Part number: ABS019C-27
Used when sampling is required in a chill or cold store. The conical head prevents ice or condensation from covering the sampling hole.


 
Price: £6.5
ABS Flush Sampling Kit 27mm
Part number: ABS019F-27
Used when the aspirating pipe work is above a suspended ceiling, the flush head is fixed to the ceiling tile with the supplied nut and linked to the pipework using a two meter length of 10mm OD tubing and a capillary Tpiece which links into the pipe.
 
Price: £7.5
ABS Discrete Kit 27mm
Part number: ABS020-27
The capillary Tee piece fits on to the pipe run. Is followed by a 2meter 10mm OD nylon tube which links into the discrete head.


 
Price: £7.5
ABS Conical End Cap Kit 27mm
Part number: ABS019C-27-EC
The capillary end cap is fixed to one end of the pipe run, followed by 2 meters of capillary 10mm OD nylon tube which links to the conical sampling head which is specifically designed to operate in a chilled or cold store.
 
Price: £6.5
ABS Flush End Cap Kit 27mm
Part number: ABS019F-27-EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links in to the flush sampling head, which is fixed by a nylon nut/washer to the ceiling tile.
 
Price: £6.5
ABS Discrete End Cap Kit 27mm
Part number: ABS020-27-EC
The capillary end cap fits on to the end of the pipe run. There is then a 2 meter 10mm OD nylon tube which links into the discrete head. The discrete cap is supplied with a solid head.

 
Price: £3.5
ABS Flush Head Only
Part number: PIP-015
Used to fix to a ceiling tile with the nut or washer (supplied) to sample air.



 
Price: £0.2
Discrete Head Only
Part number: 222-059
A non-intrusive sampling point.

 
Price: £3.5
ABS Conical Head Only
Part number: E700-SP
Is fixed to a ceiling tile, chill or frozen store ceiling with the nut or washer (supplied) to sample air. The conical shape is specifically designed to avoid ice or condensation from freezing over or covering the sampling hole.

 
Price: £6.5
Air Sampling Point Label
Part number: ABS128-014
Air Sampling Point Label 128-014 - Pack of 100pcs.
 
Price: £59.99
Refrigerated Storage Sampling Kit
Part number: VSP-860
Refrigerated Storage Sampling Kit provides a standardised method of smoke sampling for Refrigerated Storage facilities in a considerably improved manner allowing simplified installation with reduced maintenance, thus promoting more reliable and hassle-free operation.
Refrigerated Storage Sampling Kit has been designed to replace standard cone-shaped sampling nozzles installed at the ceiling in existing or new Refrigerated Storage facilities.
This kit can be installed in the entire facility or combined with standard sampling points if required. The aim here is to reduce direct ice blockage of the sampling points hence this kit is recommended for installation in areas where higher humidity is likely to occur as a result of vehicle and pedestrian traffic (e.g. areas close to doorways or perimeter of the facility).